Bell Helicopter Textron
Specifications |
Process Code |
Title |
---|---|---|
6 |
Appendix VI-Controlled Items |
|
FLT |
Approved for Flight Safety, Critical and Primary parts |
|
BPS 4089 |
IB1 |
Inspection, Fluorescent Penetrant, of machined Parts (Water Washable) |
IB2 |
Inspection, Fluorescent Penetrant, of machined Parts (Post-Emulsified) |
|
IB3 |
Inspection, Fluorescent Penetrant (Water Washable) Castings; Includes |
|
IB4 |
Inspection, Fluorescent Penetrant (Post-Emulsified) Castings/ Forgings; |
|
BPS 4138 |
PS |
Chemical Cleaning of Aircraft Materials |
BPS 4182 |
QB1 |
Chemical Film Treatment, Class 1A |
BPS 4389 |
QE1 |
Chemical Milling Aluminum |
QE3 |
Chemical Milling Stainless and High Alloy Steels |
|
QE5 |
Chemical Milling of Titanium Alloys |
|
QE6 |
Chemical Milling Titanium Forgings |
|
QE7 |
Pre-Penetrant Etch of Aluminum |
|
QE9 |
Pre Penetrant Etch Titanium |
|
SA |
Sheet Metal Assemblies (Complex) |
|
SB |
Sheet Metal Assemblies (Simple) |
|
SC |
Sheet Metal Details |
|
BPS 4453 |
IH1 |
Inspection, Conductivity, of Wrought Aluminum Alloy Sheet, Bar, Plate, Forgings & Extrusions to Determine Heat Treat |
BPS 4467 |
IO |
Hardness Testing |
BPS 4462 |
SN1 |
Forming Titanium Sheet-Cold Forming |
SN2 |
Forming Titanium Sheet-Hot Forming |
|
SN4 |
Cleaning and Descaling of Titanium Material to Section1 |
|
SO |
Forming, Roll |
|
ZA |
Miscellaneous |
BF GOODRICH
Specifications |
Process Code |
Title |
---|---|---|
QA-111 |
|
Control of Digital Product Definition/Model Based Definition |
RPS 14.06 |
|
Chemical Milling of Aluminum Alloys |
RPS 14.10 |
|
Chemical Milling of Titanium Alloys |
RPS 15.45 |
|
Surface Preparation of Titanium |
Boeing
Specifications |
Process Code |
Title |
---|---|---|
ASTM-B-117 |
810 |
Salt Spray Testing |
ASTM-E-1417 |
411 |
Penetrant Inspection |
BAC 5019 |
305 |
Chromic Acid Anodizing-Classes 1 and 3 |
BAC 5019 |
317 |
Chromic Acid Anodizing-Class 5 |
BAC 5423 |
410 |
Penetrant Inspection |
BAC 5719 |
321 |
Chemical Conversion Coating for Aluminum, (Immersion Application Only) |
BAC 5772 |
533 |
Chemical Milling of Aluminum, Type I and II (QPL) |
BAC 5793 |
392 |
Application of Corrosion Resistant Finish for Integral Fuel Tanks – manual touch-up excluded for requiring approval |
BAC 5842 |
530 |
Chemical Milling of Titanium Alloys (QPL) |
BSS 7039 |
410A |
Liquid Penetrant Inspection |
Chem. Testing |
809 |
Process Solution Control |
DPS 4.50-127 |
L392A |
Fuel Tank Coating-manual touch-up excluded for requiring approval |
DPS 4.707 |
L410 |
Penetrant Inspection |
DPS 9.481 |
L532 |
Chemical Milling – Aluminum |
DPS 9.483 |
L530 |
Chemical Milling – Titanium |
DPS 11.01 |
L304 |
Chromic Acid Anodizing |
DPS 11.01-3 |
L304B |
Chromic Acid Anodizing – Chromate Sealed |
HP 18-4 |
M531 |
Chemical Milling (QPL) |
MIL-A-8625 |
300 |
Chromic Acid Anodizing – Type I |
MIL-C-5541 |
320 |
Chemical Conversion Coatings on Aluminum and Aluminum Alloys (Immersion App Only) |
MIL-DTL-5541 |
320B |
Chemical Conversion Coatings on Aluminum and Aluminum Alloys (Immersion App Only) |
NAS 410 |
849A |
NDI Personnel Certification–Level 3 Penetrant |
PS 20022 |
S531 |
Chemical Milling |
Quality System |
001 |
Boeing Approved QS as defined in D1-4426 Processor Requirements Section 6.15.1 |
Quality System |
002 |
Boeing Approved QS as defined in D1-4426 Processor Requirements Section 6.15.2 |
Bombardier
Specifications |
Process Code |
Title |
---|---|---|
BAERD-GEN-018-1B |
Chemical Testing: Treatment Solutions & Waters |
|
BAERD-GEN-018-5A |
Specialized Tests: Corrosion Testing |
|
BAPS 138-055 |
Accelerated Curing of Organic Coatings |
|
BAPS 138-43 |
Application of Fluid Resistant Primer |
|
BAPS 138-44 |
Application of Fluid Resistant Polyurethane Coating |
|
BAPS 138-49 |
Application of BAMS 565-013 Heat Resistant Coating |
|
BAPS 157-026 |
Spray Application of BAMS 565-010 Integral Tank Coating |
|
BAPS 160-10 |
Chromic Acid Anodizing |
|
BAPS 160-20 |
Chemical Conversion Treatment for Aluminum Alloys |
|
BAPS 168-013 |
Hardness and Electrical Conductivity Testing of Metals |
|
BAPS 168-015 |
Stress Relief of Metals |
|
BAPS 176-02 |
Fluorescent Penetrant Inspection |
|
BAPS 180-001 |
Alkaline Cleaning |
|
BAPS 180-30 |
Alkaline Etching of Aluminum Alloys |
|
BAPS 180-31 |
Cleaning and Deoxidizing Corrosion and Heat Resistant Alloys and Titanium Alloys |
|
BAPS 180-32 |
Acid Cleaning and Deoxidizing Aluminum Alloys |
|
BAPS 186 |
Chemical Milling of Aluminum |
|
BAPS 186-03 |
Chemical Milling of Titanium & Titanium Alloys |
|
MPS 180-001 |
Alkaline Cleaning |
|
PPS 20.08 |
Hardness Testing |
|
PPS 32.01 |
Chromate Conversion Coating |
|
PPS 32.03 |
Chromic Acid Anodizing (A1) |
|
PPS 34.03 |
Application of Polyurethane Enamel (F24 & F37) |
|
PPS 34.08 |
Epoxy Prime |
|
PPS 01.02 |
Forming Aluminum Alloys (Limitation: limited to forming only) |
|
PPS 20.07 |
Conductivity Testing |
|
PPS 31.02 |
Cleaning Processes of Aluminum |
|
PPS 42.01 |
Chemical Milling of Aluminum and Aluminum Alloys |
Cessna Aircraft (Textron Aviation)
Specifications |
Process Code |
Title |
---|---|---|
CSFS 007 |
Application of Organic Coating |
|
CSFS 020 |
Chromic Acid Anodize – Type I |
|
CSFS 027 |
Chemical Film, Chromate |
|
CSFS 036 |
Aqueous Degreasing |
|
CSFS 039 |
Solvent Cleaning |
|
CSFS 044 |
Alkaline Cleaning of Metals |
|
CSFS 045 |
Etch & Deox of Aluminum |
|
CSFS 084 |
Coatings, VOC Compliant, Application |
|
CSMP 044 |
Chemical Milling |
|
CSTI 002 |
Penetrant Inspection |
|
CSTI 008 |
Electrical Conductivity Testing |
|
CSTI 028 |
Hardness Testing of Metals |
|
TP 1601 |
Hardness Test of Metals |
Embraer
Specifications |
Process Code |
Title |
---|---|---|
NE 07-001 |
Liquid Penetrant Inspection |
|
NE 07-012 |
Hardness and Conductivity Inspection for Non-Ferrous Metal |
|
NE 40-006 |
Aluminum and Its Alloys – Chemical Conversion Coating |
|
NE 40-012 |
Metallic Parts – Cleaning |
|
NE 40-030 |
Aluminum and Its Alloys – Anodic Coatings in Chromic Acid |
|
NE 40-143 |
Epoxy Primer, Chromate Based, Fluid Resistant (MEP 10-059, Types I, II and III) For Metallic Detail Parts – Application Requirements |
|
NE 40-160 |
High Solids Polyurethane and Metallic (MICA) Enamel (MEP 10-069) Application Requirements |
GE Transportation
Specifications |
Process Code |
Title |
---|---|---|
AMS-C-81769 |
Chemical Milling of Metals, Specification for |
|
P1T98 |
Chemical Milling |
Gulfstream Aerospace
Specifications |
Process Code |
Title |
---|---|---|
ASTM B117 |
5.11 |
Material Test-Salt Spray |
ASTM-E-1417 |
5.09 |
Penetrant Fluorescent |
GAMPS 2701 |
8.11 |
Chemical Milling of Aluminum |
GAMPS 2702 |
8.12 |
Chemical Milling of Steel |
8.13 |
Chemical Milling of Titanium |
|
GAMPS 3103 |
7.05 |
Finish Paint, Topcoat and Primers |
GAMPS 3104 / 3105 / 3115 / 3116 / 3205 |
||
GAMPS 4107 |
8.54 |
Titanium Cleaning |
8.58 |
Conductivity Testing |
|
8.59 |
Rockwell Testing |
|
GAMPS 6201 / MIL-A-8625 |
2.05 |
Chromic Anodize, Type 1 |
GAMPS 6113 / MIL-C-5541 |
3.02 |
CV Coat -AL CL 1 |
GAMPS 6113 / MIL-C-5541 |
3.03 |
CV Coat-AL- CL3 |
5.04 |
Material Test Physical |
Honda Aircraft Company
Specifications |
Process Code |
Title |
---|---|---|
HJPS-7008 |
Chemical Milling of Metals |
Israel Aerospace Industries
Specifications |
Process Code |
Title |
---|---|---|
PS 211600 D25 |
Cleaning of Aluminum and Aluminum Alloys |
|
PS 231120 D53 |
Chromic Acid Anodizing |
|
PS 233200 D79 |
Chemical Conversion Coatings for Aluminum and Aluminum Alloys |
|
PS 243900 E22 |
Application of Fluid-Resistant Epoxy Primer |
|
PS 247900 E44 |
Abrasion Resistant Paint |
|
PS 249150 E55 |
Polyurethane Corrosion Preventive Coatings for Aircraft Integral Fuel Tanks |
|
PS 810100 H23 |
Liquid Penetrant Inspection |
Kaman Aerostructures
Specifications |
Process Code |
Title |
---|---|---|
AS7108 |
501 |
NADCAP-Chem Processing |
AS7114 |
520 |
NADCAP-NDT |
800 |
KMAX Purchases |
|
820 |
Tooling Supplier |
|
886 |
McDonnell Douglas |
|
891-3 |
MFG/Supplier of Boeing Material, Process |
|
AS9100 Rev C 2009 |
299 |
AS9100 Quality Systems |
ISO 9000:2000 |
299-1 |
ISO 9001 System CE |
KAC Requirements |
061-1 |
Paint & Finish Primer |
KAC Requirements |
061-4 |
Paint & Finish-EP |
MIL-A-8625 Type 1 |
001-1 |
Finishing-Anodize |
MIL-C-5541 |
003 |
Finishing-Conversion |
MIL-C-81769 |
292 |
Chemical-Milling |
MIL-F-18264 |
061-2 |
Paint & Finish-ENA |
MIL-L-81352 |
061-3 |
Paint & Finish-AC |
MIL-PRF-23377 |
061-8 |
Epoxy Primer-HIG |
MIL-PRF-85285 |
061-7 |
Painting |
MIL-PRF-85582 |
061 |
Epoxy Primer |
QIP 06-02a |
899 |
Dir Supplier |
MIL-I-45208 |
999-2 |
Inspection System |
L-3 Communications
Specifications |
Process Code |
Title |
---|---|---|
TPS1-404 |
Anodizing-Aluminum Alloy |
|
TPS1-418 |
Chemical Conversion |
|
TPS1-420 |
Chemical Conversion |
|
TPS5-804 |
Penetrant Inspection |
Lockheed Martin
Specifications |
Process Code |
Title |
---|---|---|
AMS-C-5541/MIL-DTL-5541 |
210 |
Type 1 Class 1A and Class 3 Chem Film |
FPS 1004 |
242B |
Fuel Tank Coating |
FPS 1051 |
300A |
Aluminum Chemical Milling |
FPS 3035 |
243 |
Seal Bond Primer Application |
LMA-PC009 |
167 |
Processing for Hardness. Cannot Perform of 6XXX Series, Must Use QCS-001 Aprv. |
LMA-PC201 |
113 |
Penetrant (Fluorescent) Inspection |
LMA-PC201 |
113A |
Penetrant Inspection Fracture Critical |
LMA-PG001 |
148 |
Pre-Penetrant Etch-Aluminum |
LMA-PJ264 |
240C |
Application and Control of Organic Finishes |
MIL-A-8625 |
200A |
Type 1 and Type 1B Chromic Acid Anodize |
MIL-C-27725/AMS-C-27725 |
242A |
Fuel Tank Coating |
MIL-F-18624 |
240A |
Prime and Paint |
NDTS 1101 |
110B |
Penetrant Inspection |
NDTS 1101 |
110C1 |
Pre-Penetrant Etch – Aluminum |
NDTS 1101 |
110D |
Zone 1A Fracture Critical Penetrant Inspection |
NDTS 1500/1502 |
161 |
Conductivity Testing |
QCS-001 |
Control of Process |
|
2ZZP00001 |
200S |
Chromic Acid Anodize |
Lockheed Martin Missile & Fire Control
Specifications |
Process Code |
Title |
---|---|---|
AS9100 |
|
Quality Management System for Aerospace Requirements-Design |
MFG Etch-Titanium |
|
Pre-Penetrant Etch of Titanium |
MIL-A-8625 |
|
Anodic Coatings for Aluminum and Aluminum Alloys-NCL Type I |
Non Specified |
|
MFC Approved Supplier |
Northrop Grumman
Specifications |
Process Code |
Title |
---|---|---|
AMS-C-81769 |
Metals, Chemical Milling of (Limited to Aluminum and Titanium Only) |
|
ASTM-B-117 |
Standard Practice for Operating Salt Spray (Fog) Apparatus |
|
ASTM-E-1417 |
Standard Practice for Liquid Penetrant Examination |
|
GP17G |
Procedure, Etching prior to Penetrant Inspection |
|
GSS 26100 |
Chemical Milling of Aluminum Alloys |
|
GSS 26300 |
Chemical Milling of Titanium and Titanium Alloys |
|
GSS 4306 |
Integral Fuel Tank Coating (MILC27725) Application of |
|
GSS 4310 |
Application of Primer Coating, Epoxy Polyamide |
|
GSS 4510 |
Coating, Polyurethane, Application of |
|
GSS 5300 |
Forming and Straightening of Aluminum Alloys (Limited to Cold Forming Only) |
|
GT23A |
Fluorescent Penetrant Inspection |
|
IT-60 |
Penetrant Inspection |
|
LMA-PJ264 |
Application and Control of Organic Finishes |
|
MA-63 |
Chemical Milling of Aluminum |
|
MIL-A-8625 |
Anodic Coatings for Aluminum and Aluminum Alloys (Not approved for C-2, E-2 and EA-6B Programs) |
|
MIL-DTL-5541 |
Chemical Conversion Coatings for Aluminum and Aluminum Alloys (Limited to Type 1 only) |
Piper Aircraft
Specifications |
Process Code |
Title |
---|---|---|
PPS35300 |
Chemical Milling of Parts |
Spirit Aerosystems
Specifications |
Process Code |
Title |
---|---|---|
SPS-107720 |
Type II, Chemical Milling Aluminum and Aluminum Alloys |
Triumph Aerostructures – Vought Aircraft
Specifications |
Process Code |
Title |
---|---|---|
ASTM E 1417 |
Fluorescent Penetrant Inspection |
|
CVA 4-165-Cleaning |
Cleaning Titanium |
|
CVA 9-4 |
Anodize – Chromic Acid 22 + / -2V |
|
CVA 13-558 |
Chemical Milling Aluminum |
|
CVA 13-558 |
Chemical Milling Steel |
|
GAMPS 6201 |
Anodize Chromic Acid -22 V |
|
GAMPS 6201 |
Anodize Chromic Acid – 40V |
|
GAMPS 6701 |
Chemical Milling of Aluminum Alloys |
|
GP17G |
Cleaning & Etching of Aluminum |
|
GT23A |
Fluorescent Penetrant Inspection |
|
MIL-A-8625 TY 1A |
Anodize – Chromic Acid |
|
MIL-A-8625 TY 1B |
Anodize Chromic Acid 22 + / -2V |
|
MIL-C-5541 Class 1A |
Chemical Film for Aluminum Alloy |
|
MIL-C-5541 Class 3 |
Chemical Film for Aluminum Alloy |
|
MIL-C-81769 |
Chemical Milling Aluminum |
|
MIL-C-81769 |
Chemical Milling Steel |
|
MIL-C-81769 |
Chemical Milling Titanium |
|
MIL-DTL-5541 Ty 1 Class 1A |
Chemical Film for Aluminum Alloy |
|
MIL-DTL-5541 TY 1 Class 3 |
Chemical Film for Aluminum Alloy |
|
MIL-I-6866 |
Fluorescent Penetrant Inspection |
|
MIL-STD-6866 |
Fluorescent Penetrant Inspection |
|
STP51-402 (See Limit Note 004) |
Chemical Milling of Aluminum Alloys |
|
VSS 7015 |
Cleaning Titanium |
|
VSS 26100 |
Chemical Milling Aluminum |
|
VSS 26201 |
Chemical Milling Steel |
|
VSS 26300 |
Chemical Milling Titanium |
|
208-2-5 |
Chemical Milling Aluminum |
|
208-4-3 |
Chemical Milling Titanium |
|
208-4-5-Cleaning |
Cleaning Titanium |
|
208-9-64 |
Chemical Film-Colored for Aluminum Alloy |
|
208-9-100 |
Cleaning & Etching of Aluminum |
|
208-14-11 |
Fluorescent Penetrant Inspection |
|
208-14-13 CL A & AA |
Fluorescent Penetrant Inspection Class A & AA |
|
208-14-13 CL B |
Fluorescent Penetrant Inspection Class B |
|
NOTE 4 |
Approval for processing to Lockheed Martin Aeronautics Company (LMAC) specifications is valid for Vought procurement of C-5 Items only.Processing of F-2 |
|
NOTE 5 |
Approval to Airbus DA specifications is valid for Vought Procurement only. |
|
NOTE 6 |
Approval for processing to GAMPS specifications is valid for Vought procurement only. |
Viking Air
Specifications |
Process Code |
Title |
---|---|---|
VPS 42.01 |
Chemical Milling of Aluminum Alloys |